Physiopol 2 Channels 4 Elkt. and 22 Programs Digital Tens Ems Massager
5 Programs Massage
Fizyopol R C4D Massage Device has 5 different massage programs.
In this way, you can choose the program you want according to your different needs and pain conditions.
It is also suitable for the common use of different people.
Thanks to its digital display, Fizyopol R C4D Massager can be adjusted and monitored very easily.
In this way, you can easily choose the settings and programs you want.
You can also make a smarter and more practical use.
Physiopol R C4D Massage Device with 2 channels has 4 electrodes in total.
In this way, it allows you to easily massage 4 different parts of your body.
Thus, it works with a very efficient performance.
Easy to use
You can use Fizyopol R C4D Massage Device very easily thanks to the keys on it. Speed increase, decrease, open, close, program change, etc. You can use the settings very easily.
Thanks to its very small design, you can easily carry the Fizyopol R C4D Massage Device wherever you want. In this way, you can enjoy massage anywhere.
Thanks to its tens, ems and massage modes, Fizyopol R C4D Massage Device provides a wide range of use. In this way, you can use it according to your needs. It also works with superior performance and massages effectively.
FİZYOPOL TENS USAGE INSTRUCTIONS
1-Place the battery coming out of the box into the battery area of the device as indicated on the device by looking at the negative poles.
2-Connect the 2 patient cables out of the box to the sockets on the top of the device.
3-Unpack the electrodes and insert each electrode into the sockets at the ends of the cables.
4-Attach the electrodes to the area on the body specified by the doctor or physiotherapist.
5-Turn the device on by turning the round buttons on the top.
6-Select the working mode and adjust the application times as specified by the doctor or physiotherapist.
7-Turn on the output power of each channel one by one, and adjust it so as not to disturb the patient.
1-Pulse Width Us: It is used to adjust the energy applied to the patient according to the setting of the output power. (100,300us)
2-Pulse Rate (Number of beats per second): Changes to the electrodes connected to the patient and as recommended in the appropriate treatment program. (2-150 HZ)
3-Mode Lated Mode: Enables the density to increase or decrease in a cycle so that the set output density is maximum.
HOW TO OPERATE
Press ON-OFF button to turn on the device.
Select the mode (TENS-EMS-MASSAGE) by pressing the ON-OFF button.
After selecting the mode, select a program by pressing the (P) button.
Tens: P1-P2-P3-P4-P5-P6 Ready
U1-U2-U3 Manual program
U1-U2-U3 Manual program
Select the manual program that you want to adjust manually (P) Hold it down and switch to manual adjustment. Then change the values with the (P) and + - keys.
To start the device, select the mode, then select Program and press the + and? Keys on CH1 and CH2. Start to increase or decrease the current using the key.
1-Electrode cables are attached to the sockets on the device. When plugging and unplugging, it is important to hold it from the jack, not the cable. Otherwise, the cable may be damaged.
2-After the painful area is wiped with a damp cloth, the electrodes are tied in a way that the painful area is brought together. In addition, by using low frequency, connecting an electrode on the trigger point and using high output intensity, muscle spasms can be resolved.
ATTENTION: AS THE PRODUCTS ARE AVAILABLE FOR PERSONAL USE CONTAINING HYGIENE, IF THE PRODUCT BAG IS OPENED AND USED, IT CANNOT BE ASSESSED UNDER THE RIGHT TO WITHDRAWAL REGARDING THE RELATED PROVISIONS OF THE DISTANCE SALES REGULATION. IN THE EVENT OF THE DEVICE IS DEFECTIVE, THE PRODUCT IS DIRECTED TO THE TECHNICAL SERVICE. IN THIS SITUATION, OUR COMPANY PROVIDES THE NECESSARY SUPPORT, AND THE REPAIR AND REPLACEMENT OF YOUR DEVICE IS CARRIED OUT ACCORDING TO THE TECHNICAL SERVICE REPORT.